Drum Brake Shoe - Acdelco Gold/professional Brakes - Rear Brake Shoe Set (Part Number: 14519B)
- Application Summary: ChryslerDodgePlymouth
- AAIA Part Type Description: Drum Brake Shoe
- Extended Product Description: Bonded Rear Drum Brake Shoe Set
- Key Search Words: brake-pad-brake-shoerotorsdrumbrake-jobfront-brakerear-brakecyliderhydraluicdot-3dot-4front-brakesrear-brakesbrake-setbreaks
- ACDelco Market Indicator CA - L0: Y
- ACDelco Market Indicator US - L0: Y
- Brake Drum Diameter: 200 MM
- Brake Drum Diameter: 7.874 IN
- Brake Shoe Width: 1.28 IN
- Brake Shoe Width: 32.5 MM
- California Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Drum Inside Diameter: 7.87 IN
- FAQ - Answer 1: No, but it is a good idea to inspect your brake shoes at each tire rotation.
- FAQ - Answer 2: Yes, it is a good idea to inspect your brake fluid often.
- FAQ - Answer 3: No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
- FAQ - Question 1: Do I have to replace my brake shoes after a certain amount of time?
- FAQ - Question 2: Do I need to check my brake fluid when replacing other brake parts?
- FAQ - Question 3: Do I have to replace all my brake parts when replacing my brake shoes?
- Friction Material: Organic
- Friction Material Attachment: Bonded
- Good Maintenance Practices - Section 1 - Bullet 1: Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- Good Maintenance Practices - Section 1 - Bullet 2: Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- Good Maintenance Practices - Section 1 - Bullet 3: Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- Good Maintenance Practices - Section 1 - Header: The following inspections and maintenance procedures can help prevent potential brake problems:
- Good Maintenance Practices - Section 2 - Bullet 1: Inspection of the brake hoses for brittleness or cracking.
- Good Maintenance Practices - Section 2 - Bullet 2: Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- Good Maintenance Practices - Section 2 - Bullet 3: Inspection of wheel bearings and grease seals.
- Good Maintenance Practices - Section 2 - Bullet 4: Parking brake adjustments (as needed).
- Good Maintenance Practices - Section 2 - Header: The following should be conducted by a qualified technician:
- Height: 3.62 IN
- Length: 9.5 IN
- Mounting Hardware Included: No
- Primary Shoe Friction Material Length (in): 7.9 in
- Primary Shoe Friction Material Length (mm): 199.9 mm
- Programming Required: No
- Secondary Shoe Friction Material Length (in): 7.9 in
- Secondary Shoe Friction Material Length (mm): 199.9 mm
- Signs of Wear & Troubleshooting - Section 1 - Bullet 1: Brake pedal pulsation (not to be confused with normal ABS operation).
- Signs of Wear & Troubleshooting - Section 1 - Bullet 2: Squealing or grinding noises.
- Signs of Wear & Troubleshooting - Section 1 - Bullet 3: Low brake pedal height.
- Signs of Wear & Troubleshooting - Section 1 - Bullet 4: Vehicle pulls to the left or right when brakes are applied.
- Signs of Wear & Troubleshooting - Section 1 - Header: Brake shoe signs of wear include:
- Weight: 2.9 LB
- Width: 8.12 IN
- CTO: CN
- CTP: MX
- Harmonized Tariff Code (HTS): 8708305090
- Life Cycle Status Code: 7
- Life Cycle Status Description: Superseded
- Part Number - Old: 19292645
- Part Number Superseded To: 17519B
- Warranty Special: 12 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.
- Warranty Special UOM: TX
- Manufacturer:
- Acdelco Gold/professional Brakes
- Part Number:
- 14519B
- Manufacturer Part Number:
- 14519B
- Description:
- Drum Brake Shoe
- Long Description:
- Rear Brake Shoe Set
- Part Type:
- Drum Brake Shoe
- Category:
- Brake
- Subcategory:
- Disc Pads And Brake Shoes
- Sales Rank:
Product Details
- Core Price:
- ...
- Weight:
- 2.9 lbs.
- Height:
- 3.62"
- Width:
- 8.12"
- Length:
- 8.12"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Minimum Order Qty:
- 1
Technical Details
- Features & Benefits - Bullet 1
- Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
- Features & Benefits - Bullet 2
- Quality validated for proper metallurgy and correct brake plate thickness
- Features & Benefits - Bullet 3
- Non-directional brake surface finish for consistent braking
- Features & Benefits - Bullet 4
- Available in riveted and bonded for various vehicle applications
- Features & Benefits - Bullet 5
- Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage
- Features & Benefits - Bullet 6
- Economical value with dependable quality
- Features & Benefits - Bullet 7
- For General Motors vehicles as well as most makes and models
Features and Benefits
- Application Summary
- ChryslerDodgePlymouth
- AAIA Part Type Description
- Drum Brake Shoe
- Extended Product Description
- Bonded Rear Drum Brake Shoe Set
- Key Search Words
- brake-pad-brake-shoerotorsdrumbrake-jobfront-brakerear-brakecyliderhydraluicdot-3dot-4front-brakesrear-brakesbrake-setbreaks
- ACDelco Market Indicator CA - L0
- Y
- ACDelco Market Indicator US - L0
- Y
- Brake Drum Diameter
- 200 MM
- Brake Drum Diameter
- 7.874 IN
- Brake Shoe Width
- 1.28 IN
- Brake Shoe Width
- 32.5 MM
- California Proposition 65
- WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Drum Inside Diameter
- 7.87 IN
- FAQ - Answer 1
- No, but it is a good idea to inspect your brake shoes at each tire rotation.
- FAQ - Answer 2
- Yes, it is a good idea to inspect your brake fluid often.
- FAQ - Answer 3
- No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
- FAQ - Question 1
- Do I have to replace my brake shoes after a certain amount of time?
- FAQ - Question 2
- Do I need to check my brake fluid when replacing other brake parts?
- FAQ - Question 3
- Do I have to replace all my brake parts when replacing my brake shoes?
- Friction Material
- Organic
- Friction Material Attachment
- Bonded
- Good Maintenance Practices - Section 1 - Bullet 1
- Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- Good Maintenance Practices - Section 1 - Bullet 2
- Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- Good Maintenance Practices - Section 1 - Bullet 3
- Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- Good Maintenance Practices - Section 1 - Header
- The following inspections and maintenance procedures can help prevent potential brake problems:
- Good Maintenance Practices - Section 2 - Bullet 1
- Inspection of the brake hoses for brittleness or cracking.
- Good Maintenance Practices - Section 2 - Bullet 2
- Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- Good Maintenance Practices - Section 2 - Bullet 3
- Inspection of wheel bearings and grease seals.
- Good Maintenance Practices - Section 2 - Bullet 4
- Parking brake adjustments (as needed).
- Good Maintenance Practices - Section 2 - Header
- The following should be conducted by a qualified technician:
- Height
- 3.62 IN
- Length
- 9.5 IN
- Mounting Hardware Included
- No
- Primary Shoe Friction Material Length (in)
- 7.9 in
- Primary Shoe Friction Material Length (mm)
- 199.9 mm
- Programming Required
- No
- Secondary Shoe Friction Material Length (in)
- 7.9 in
- Secondary Shoe Friction Material Length (mm)
- 199.9 mm
- Signs of Wear & Troubleshooting - Section 1 - Bullet 1
- Brake pedal pulsation (not to be confused with normal ABS operation).
- Signs of Wear & Troubleshooting - Section 1 - Bullet 2
- Squealing or grinding noises.
- Signs of Wear & Troubleshooting - Section 1 - Bullet 3
- Low brake pedal height.
- Signs of Wear & Troubleshooting - Section 1 - Bullet 4
- Vehicle pulls to the left or right when brakes are applied.
- Signs of Wear & Troubleshooting - Section 1 - Header
- Brake shoe signs of wear include:
- Weight
- 2.9 LB
- Width
- 8.12 IN
- CTO
- CN
- CTP
- MX
- Harmonized Tariff Code (HTS)
- 8708305090
- Life Cycle Status Code
- 7
- Life Cycle Status Description
- Superseded
- Part Number - Old
- 19292645
- Part Number Superseded To
- 17519B
- Warranty Special
- 12 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.
- Warranty Special UOM
- TX
Specifications
The ACDELCO GOLD/PROFESSIONAL BRAKES Drum Brake Shoe contains no remanufactured components, and is designed to operate in either city or highway driving.
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.